{"id":25991384,"date":"2026-11-19T08:04:33","date_gmt":"2026-11-19T16:04:33","guid":{"rendered":"https:\/\/dbhorsestable.com\/en\/horse-walker-drive-wheel-track-alignment-acceptance-checks\/"},"modified":"2026-11-19T08:04:33","modified_gmt":"2026-11-19T16:04:33","slug":"horse-walker-drive-wheel-track-alignment-acceptance-checks","status":"publish","type":"post","link":"https:\/\/dbhorsestable.com\/de\/horse-walker-drive-wheel-track-alignment-acceptance-checks\/","title":{"rendered":"Horse Walker Drive Wheels and Track Alignment: Acceptance Checks Before a Training Yard Takes Delivery"},"content":{"rendered":"<p style=\"line-height: 1.8; margin-bottom: 28px;\">A horse walker arrives on site in two parts: the visible ring, and the drive path that turns it \u2014 hub, arm, carriage and the wheel that puts power into the track. Yards inspect the ring on delivery day because it is the visible part. Walker drive wheel alignment is the item that decides whether the ring still turns smoothly months later, and it is almost never on the acceptance sheet.<\/p>\n<p style=\"line-height: 1.8; margin-bottom: 28px;\">Published facts about this equipment are thin: an Italian motor in the drive, steel hot-dip galvanized with a stated 20-year rust-resistance figure, and a claimed 500-plus sets a month. Ring diameter, track radius, wheel count, speed and torque are not published here, so an acceptance check is written against the supplier&#8217;s documents rather than a rule of thumb.<\/p>\n\n<div style=\"background-color: #f9f9f9; border-left: 4px solid #1a5f2a; padding: 20px 24px; border-radius: 4px; margin-bottom: 28px;\">\n<p style=\"margin: 0 0 10px 0; font-weight: 700;\">Key Takeaways<\/p>\n<ul>\n<li><strong>Alignment is a chain:<\/strong> hub to arm, arm to carriage, carriage to track. A fault in any link shows as rhythm, not a break.<\/li>\n<li><strong>Documents arrive before the truck.<\/strong> Dimension drawing, motor and gearbox data, coating spec, and the fixing loads for the base.<\/li>\n<li><strong>Check joints for step, not just gap.<\/strong> A lipped joint is what a wheel rides over and what wearing starts from.<\/li>\n<li><strong>Run empty before loaded.<\/strong> A no-load cycle exposes a mis-set drive wheel without a horse in the ring.<\/li>\n<li><strong>Every number comes from the supplier.<\/strong> No diameter, speed, torque or wheel specification is published here, so ask for tolerances in writing.<\/li>\n<\/ul>\n<\/div>\n\n<nav style=\"background-color: #f9f9f9; border: 1px solid #e0e0e0; border-radius: 4px; padding: 20px 24px; margin-bottom: 28px;\">\n<p style=\"margin: 0 0 10px 0; font-weight: 700;\">In this guide<\/p>\n<ul>\n<li><a href=\"#drive-path\">What has to line up on a horse walker<\/a><\/li>\n<li><a href=\"#paperwork-first\">The paperwork that arrives before the delivery<\/a><\/li>\n<li><a href=\"#acceptance-sequence\">The acceptance sequence, in order<\/a><\/li>\n<li><a href=\"#handover\">Writing the handover so the fix actually happens<\/a><\/li>\n<li><a href=\"#frequently-asked-questions\">Frequently Asked Questions<\/a><\/li>\n<li><a href=\"#conclusion\">Conclusion<\/a><\/li>\n<\/ul>\n<\/nav>\n\n<h2 id=\"drive-path\" style=\"margin-top: 50px; margin-bottom: 30px; font-size: 28px; border-bottom: 2px solid #eee; padding-bottom: 10px; font-weight: bold;\">What has to line up on a horse walker<\/h2>\n<p style=\"line-height: 1.8; margin-bottom: 28px;\">Follow the load. The horse pushes through the rail, the rail through the arm, the arm through the hub, and the hub through a drive wheel onto a track bolted to a base. Each interface is where a small error becomes a large one once the machine turns under load. Ring concentricity, column plumb and even contact between every loaded wheel and the rail are three separate checks, not one.<\/p>\n<p style=\"line-height: 1.8; margin-bottom: 28px;\">A mis-set wheel rarely announces itself. It shows as a periodic knock each time the carriage passes a joint, which is why an empty run tells a yard more than a static measurement. Where the drive sits changes the checks too: a ground-level motor driving through the hub is a different inspection from a carriage that carries its own motor, and the model delivered decides what belongs on your sheet.<\/p>\n<figure style=\"margin: 0 0 28px 0;\">\n<img decoding=\"async\" src=\"https:\/\/dbhorsestable.com\/wp-content\/uploads\/2025\/06\/Lunging-Pens-Horse23.jpg\" class=\"wp-image-25981421\" width=\"1176\" height=\"800\" loading=\"lazy\" alt=\"An indoor horse walker ring inside a high-roofed hall with steel beams: a bay horse walking on a circular track with timber lower panels and metal upper rails, and a central hub with arms reaching into the ring\" style=\"width: 100%; height: auto;\" srcset=\"https:\/\/dbhorsestable.com\/wp-content\/uploads\/2025\/06\/Lunging-Pens-Horse23.jpg 1176w, https:\/\/dbhorsestable.com\/wp-content\/uploads\/2025\/06\/Lunging-Pens-Horse23-980x667.jpg 980w, https:\/\/dbhorsestable.com\/wp-content\/uploads\/2025\/06\/Lunging-Pens-Horse23-480x327.jpg 480w\" sizes=\"(min-width: 0px) and (max-width: 480px) 480px, (min-width: 481px) and (max-width: 980px) 980px, (min-width: 981px) 1176px, 100vw\" \/>\n<figcaption style=\"font-size: 14px; color: #666; margin-top: 8px;\">The drive path is visible here \u2014 central hub, arm, ring \u2014 inside a steel-framed hall. What a photograph cannot give you is the tolerance behind it.<\/figcaption>\n<\/figure>\n<p style=\"line-height: 1.8; margin-bottom: 28px;\">Base interface is the fourth link, and buyers inherit it rather than inspect it. Whether load reaches the ground through a shoe, a sleeve or a bolted base plate is a question the delivery drawing has to answer; this site publishes no anchor loads or foundation detail, so that drawing is requested, not assumed.<\/p>\n\n<h2 id=\"paperwork-first\" style=\"margin-top: 50px; margin-bottom: 30px; font-size: 28px; border-bottom: 2px solid #eee; padding-bottom: 10px; font-weight: bold;\">The paperwork that arrives before the delivery<\/h2>\n<p style=\"line-height: 1.8; margin-bottom: 28px;\">Four documents make an acceptance check possible; without them the yard signs against somebody&#8217;s memory, which tends to leave a bad alignment as the operator&#8217;s cost.<\/p>\n<table style=\"width: 100%; border-collapse: collapse; margin-bottom: 28px; border: 1px solid #e0e0e0; font-family: inherit;\">\n<tr><th style=\"background-color: #1a5f2a; color: #ffffff; padding: 12px 15px; text-align: left; border: 1px solid #e0e0e0; font-weight: bold;\">Document<\/th><th style=\"background-color: #1a5f2a; color: #ffffff; padding: 12px 15px; text-align: left; border: 1px solid #e0e0e0; font-weight: bold;\">What it settles<\/th><th style=\"background-color: #1a5f2a; color: #ffffff; padding: 12px 15px; text-align: left; border: 1px solid #e0e0e0; font-weight: bold;\">What to check on arrival<\/th><\/tr>\n<tr><td style=\"padding: 12px 15px; border: 1px solid #e0e0e0; color: #333;\">Dimension drawing of the ring and hub<\/td><td style=\"padding: 12px 15px; border: 1px solid #e0e0e0; color: #333;\">Diameter, arm length, joint positions, stated tolerance<\/td><td style=\"padding: 12px 15px; border: 1px solid #e0e0e0; color: #333;\">That a tolerance is printed on it.<\/td><\/tr>\n<tr><td style=\"padding: 12px 15px; border: 1px solid #e0e0e0; color: #333;\">Motor and gearbox data for the drive unit<\/td><td style=\"padding: 12px 15px; border: 1px solid #e0e0e0; color: #333;\">Rating plate, speed range, protection class<\/td><td style=\"padding: 12px 15px; border: 1px solid #e0e0e0; color: #333;\">That the delivered plate matches the sheet.<\/td><\/tr>\n<tr><td style=\"padding: 12px 15px; border: 1px solid #e0e0e0; color: #333;\">Coating specification for the steelwork<\/td><td style=\"padding: 12px 15px; border: 1px solid #e0e0e0; color: #333;\">Hot-dip process, the 20-year rust-resistance statement<\/td><td style=\"padding: 12px 15px; border: 1px solid #e0e0e0; color: #333;\">Whether a coating thickness is stated at all.<\/td><\/tr>\n<tr><td style=\"padding: 12px 15px; border: 1px solid #e0e0e0; color: #333;\">Fixing and base-load detail<\/td><td style=\"padding: 12px 15px; border: 1px solid #e0e0e0; color: #333;\">How the ring transfers load into the ground<\/td><td style=\"padding: 12px 15px; border: 1px solid #e0e0e0; color: #333;\">That your slab matches what it assumes.<\/td><\/tr>\n<\/table>\n<p style=\"line-height: 1.8; margin-bottom: 28px;\">Quality management sits behind an ISO 9001 system, and a CE claim should arrive with the declaration behind it rather than a logo on a brochure. Certificate numbers are not published here, so ask for them in writing; <a href=\"https:\/\/dbhorsestable.com\/en\/horse-walkers-italian-motors-roof-options-sizing\/\" rel=\"noopener\">horse walkers, Italian motors and roof options<\/a> is where the drive and cover choices are laid out.<\/p>\n\n<h2 id=\"acceptance-sequence\" style=\"margin-top: 50px; margin-bottom: 30px; font-size: 28px; border-bottom: 2px solid #eee; padding-bottom: 10px; font-weight: bold;\">The acceptance sequence, in order<\/h2>\n<p style=\"line-height: 1.8; margin-bottom: 28px;\">Work from fixed geometry toward moving parts, and do not let a supplier compress this into one walk-around.<\/p>\n<ul>\n<li><strong>1 \u2014 Ring geometry.<\/strong> Measure the diameter across the ring at several evenly spaced points and compare with the drawing. The spread between readings is the finding; the drawing says whether it is allowed.<\/li>\n<li><strong>2 \u2014 Track joints.<\/strong> Run a straightedge over every joint and feel for a step. A gap can close as the steel warms, so the drawing tolerance decides what counts; a lipped joint is what a drive wheel hammers and where a worn flat starts.<\/li>\n<li><strong>3 \u2014 Hub and arm.<\/strong> Check the column is plumb both ways, the arm turns freely, and the hub fixings match the torque figure in the manual, re-checking at the interval the manual states.<\/li>\n<li><strong>4 \u2014 Wheel contact.<\/strong> Ask how many wheels carry load by design, then confirm each touches the rail with the same pressure. A feeler card that slides under one wheel and binds under another is your evidence.<\/li>\n<li><strong>5 \u2014 No-load run.<\/strong> One full empty cycle at each speed the controller offers, listening for a knock that repeats once per revolution, which points at a joint or a wheel.<\/li>\n<li><strong>6 \u2014 Loaded run.<\/strong> Only after stages one to five are signed. Keep the emergency stop reachable before a horse enters; the <a href=\"https:\/\/dbhorsestable.com\/en\/horse-walker-safety-checklist\/\" rel=\"noopener\">walker safety checklist<\/a> covers that, not this section.<\/li>\n<\/ul>\n<figure style=\"margin: 0 0 28px 0;\">\n<img decoding=\"async\" src=\"https:\/\/dbhorsestable.com\/wp-content\/uploads\/2025\/06\/Lunging-Pens-Horse13.jpg\" class=\"wp-image-25981426\" width=\"1200\" height=\"766\" loading=\"lazy\" alt=\"An outdoor polygon ring built from metal-framed wire mesh panels, with a central post and a single arched metal arm crossing the top, and a brown horse standing inside on mown grass\" style=\"width: 100%; height: auto;\" srcset=\"https:\/\/dbhorsestable.com\/wp-content\/uploads\/2025\/06\/Lunging-Pens-Horse13.jpg 1200w, https:\/\/dbhorsestable.com\/wp-content\/uploads\/2025\/06\/Lunging-Pens-Horse13-980x626.jpg 980w, https:\/\/dbhorsestable.com\/wp-content\/uploads\/2025\/06\/Lunging-Pens-Horse13-480x306.jpg 480w\" sizes=\"(min-width: 0px) and (max-width: 480px) 480px, (min-width: 481px) and (max-width: 980px) 980px, (min-width: 981px) 1200px, 100vw\" \/>\n<figcaption style=\"font-size: 14px; color: #666; margin-top: 8px;\">A central post and one arm crossing the top of an outdoor ring. Wheel count, drive arrangement and tolerance are not in the frame, which is why those figures belong on the drawing you requested.<\/figcaption>\n<\/figure>\n<p style=\"line-height: 1.8; margin-bottom: 28px;\">Two conditions knock a ring out of alignment while it is still new: a base prepared to a different assumption than the machine, and sections laid rather than set. Both show in stages two and four if somebody is looking, and both are usually cheaper to fix before the balance is paid.<\/p>\n\n<h2 id=\"handover\" style=\"margin-top: 50px; margin-bottom: 30px; font-size: 28px; border-bottom: 2px solid #eee; padding-bottom: 10px; font-weight: bold;\">Writing the handover so the fix actually happens<\/h2>\n<p style=\"line-height: 1.8; margin-bottom: 28px;\">A punch list is easier to act on when it is dated, photographed and signed by both sides, each item tied to a line on the drawing. Trade terms, payment stages and retention are not published here, so they are agreed in writing before the order rather than argued at the gate.<\/p>\n<p style=\"line-height: 1.8; margin-bottom: 28px;\">Replacement parts are the second half of that conversation. The stated capacity of 500-plus sets a month is a stabling measure, so ask what it means for a carriage, wheel or arm on your ring and whether those parts are held or made to order. Published minimums cover stable sets and fence panels, not walkers.<\/p>\n<p style=\"line-height: 1.8; margin-bottom: 28px;\">Delivery speed matters when an arena is out of service: global orders run inside 4-6 weeks, with Sydney and Warsaw hubs the express route at 1-2 weeks. A dedicated regional account manager is stated for orders above 20 stable sets, covering customization and logistics advice \u2014 put the punch list in front of that contact, and ask whether the same threshold applies to a walker. The <a href=\"https:\/\/dbhorsestable.com\/en\/lunging-pen-horse-walker\/\" rel=\"noopener\">lunging pen and horse walker line<\/a> shows the configurations when an acceptance sheet becomes a second unit.<\/p>\n<figure style=\"margin: 0 0 28px 0;\">\n<img decoding=\"async\" src=\"https:\/\/dbhorsestable.com\/wp-content\/uploads\/2025\/06\/Lunging-Pens-Horse42.jpg\" class=\"wp-image-25981414\" width=\"1200\" height=\"800\" loading=\"lazy\" alt=\"A circular pen under a hipped metal roof carried on white posts, with dark lower panels and clear upper panels in the wall frames and a gravel strip around the outside\" style=\"width: 100%; height: auto;\" srcset=\"https:\/\/dbhorsestable.com\/wp-content\/uploads\/2025\/06\/Lunging-Pens-Horse42.jpg 1200w, https:\/\/dbhorsestable.com\/wp-content\/uploads\/2025\/06\/Lunging-Pens-Horse42-980x653.jpg 980w, https:\/\/dbhorsestable.com\/wp-content\/uploads\/2025\/06\/Lunging-Pens-Horse42-480x320.jpg 480w\" sizes=\"(min-width: 0px) and (max-width: 480px) 480px, (min-width: 481px) and (max-width: 980px) 980px, (min-width: 981px) 1200px, 100vw\" \/>\n<figcaption style=\"font-size: 14px; color: #666; margin-top: 8px;\">A covered ring on posts with a gravel strip around it. The roof and perimeter are in frame; the drive components are not, which is the case for checking them before handover.<\/figcaption>\n<\/figure>\n\n<h2 id=\"frequently-asked-questions\" style=\"margin-top: 50px; margin-bottom: 30px; font-size: 28px; border-bottom: 2px solid #eee; padding-bottom: 10px; font-weight: bold;\">Frequently Asked Questions<\/h2>\n\n<div class=\"faq-card\" style=\"margin-bottom: 20px; padding: 25px; background-color: #f9f9f9; border-left: 4px solid #1a5f2a; border-radius: 4px;\">\n<h3 style=\"margin-top: 0; margin-bottom: 15px; font-weight: 700; line-height: 1.3; font-size: 18px;\">What is walker drive wheel alignment, in practice?<\/h3>\n<div style=\"color: #444;\"><p style=\"line-height: 1.8; margin-bottom: 0;\">It is the condition that every load-carrying wheel meets the track at the same height and pressure around a ring that is true to its drawing. Where a wheel rides high, that wheel and the rail typically wear faster than they should.<\/p><\/div>\n<\/div>\n\n<div class=\"faq-card\" style=\"margin-bottom: 20px; padding: 25px; background-color: #f9f9f9; border-left: 4px solid #1a5f2a; border-radius: 4px;\">\n<h3 style=\"margin-top: 0; margin-bottom: 15px; font-weight: 700; line-height: 1.3; font-size: 18px;\">Who should run the acceptance check \u2014 the supplier or the yard?<\/h3>\n<div style=\"color: #444;\"><p style=\"line-height: 1.8; margin-bottom: 0;\">Both, on the same day, on one sheet. The fitter knows what the machine should do; the yard owns it afterward. Two dated signatures make it easier to have a finding handled under warranty, and warranty terms are not published here.<\/p><\/div>\n<\/div>\n\n<div class=\"faq-card\" style=\"margin-bottom: 20px; padding: 25px; background-color: #f9f9f9; border-left: 4px solid #1a5f2a; border-radius: 4px;\">\n<h3 style=\"margin-top: 0; margin-bottom: 15px; font-weight: 700; line-height: 1.3; font-size: 18px;\">How do I know a track joint is out of tolerance?<\/h3>\n<div style=\"color: #444;\"><p style=\"line-height: 1.8; margin-bottom: 0;\">Compare what you measure with the tolerance printed on the supplier&#8217;s drawing. That is why the drawing is requested before delivery: this site publishes no joint tolerance, so a field judgment has nothing to stand on without it.<\/p><\/div>\n<\/div>\n\n<div class=\"faq-card\" style=\"margin-bottom: 20px; padding: 25px; background-color: #f9f9f9; border-left: 4px solid #1a5f2a; border-radius: 4px;\">\n<h3 style=\"margin-top: 0; margin-bottom: 15px; font-weight: 700; line-height: 1.3; font-size: 18px;\">Does a roof change the acceptance checks?<\/h3>\n<div style=\"color: #444;\"><p style=\"line-height: 1.8; margin-bottom: 0;\">It adds a few: post plumb, rainwater paths off the track, and condensation dripping onto the drive rather than away from it. Cover and sizing sit with the machine configuration, so treat them as one inspection sheet.<\/p><\/div>\n<\/div>\n\n<div class=\"faq-card\" style=\"margin-bottom: 20px; padding: 25px; background-color: #f9f9f9; border-left: 4px solid #1a5f2a; border-radius: 4px;\">\n<h3 style=\"margin-top: 0; margin-bottom: 15px; font-weight: 700; line-height: 1.3; font-size: 18px;\">What documents should arrive with a horse walker?<\/h3>\n<div style=\"color: #444;\"><p style=\"line-height: 1.8; margin-bottom: 0;\">A dimension drawing with tolerances, motor and gearbox data with the rating plate, the coating specification, the base and fixing loads, and the declarations behind any certification claim. A manual that states torque figures closes the list.<\/p><\/div>\n<\/div>\n\n<script type=\"application\/ld+json\">{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is walker drive wheel alignment, in practice?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is the condition that every load-carrying wheel meets the track at the same height and pressure around a ring that is true to its drawing. Where a wheel rides high, that wheel and the rail typically wear faster than they should.\"}}, {\"@type\": \"Question\", \"name\": \"Who should run the acceptance check \u2014 the supplier or the yard?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Both, on the same day, on one sheet. The fitter knows what the machine should do; the yard owns it afterward. Two dated signatures make it easier to have a finding handled under warranty, and warranty terms are not published here.\"}}, {\"@type\": \"Question\", \"name\": \"How do I know a track joint is out of tolerance?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Compare what you measure with the tolerance printed on the supplier's drawing. That is why the drawing is requested before delivery: this site publishes no joint tolerance, so a field judgment has nothing to stand on without it.\"}}, {\"@type\": \"Question\", \"name\": \"Does a roof change the acceptance checks?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It adds a few: post plumb, rainwater paths off the track, and condensation dripping onto the drive rather than away from it. Cover and sizing sit with the machine configuration, so treat them as one inspection sheet.\"}}, {\"@type\": \"Question\", \"name\": \"What documents should arrive with a horse walker?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A dimension drawing with tolerances, motor and gearbox data with the rating plate, the coating specification, the base and fixing loads, and the declarations behind any certification claim. A manual that states torque figures closes the list.\"}}]}<\/script>\n\n<h2 id=\"conclusion\" style=\"margin-top: 50px; margin-bottom: 30px; font-size: 28px; border-bottom: 2px solid #eee; padding-bottom: 10px; font-weight: bold;\">Conclusion<\/h2>\n<p style=\"line-height: 1.8; margin-bottom: 28px;\">Alignment is not one measurement but a chain, and a delivery that checks the ring without checking the drive path has verified the cheaper half of the machine. Geometry, joints, hub, wheel contact, an empty run and a loaded run catch faults while they are still somebody else&#8217;s cost.<\/p>\n<p style=\"line-height: 1.8; margin-bottom: 28px;\">Ask for the drawing and its tolerance before the machine ships, sign one dated sheet on delivery day, and record what was measured rather than what was expected.<\/p>","protected":false},"excerpt":{"rendered":"<p>A horse walker arrives with two halves: the ring you can see and the drive path you cannot inspect from a photograph. Here are the acceptance checks for walker drive wheel alignment, track joints and hub fixings, and the documents that have to reach the yard before the machine does.<\/p>","protected":false},"author":1,"featured_media":25981421,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","rank_math_title":"Walker Drive Wheel Alignment: Pre-Delivery Acceptance Checks","rank_math_description":"Before a training yard takes delivery of a horse walker, check walker drive wheel alignment, track joints, hub fixings and the paperwork behind them.","rank_math_focus_keyword":"walker drive wheel alignment","rank_math_robots":"","rank_math_canonical_url":"","rank_math_facebook_title":"","rank_math_facebook_description":"","rank_math_twitter_title":"","rank_math_twitter_description":"","_yoast_wpseo_title":"Walker Drive Wheel Alignment: Pre-Delivery Acceptance Checks","_yoast_wpseo_metadesc":"Before a training yard takes delivery of a horse walker, check walker drive wheel alignment, track joints, hub fixings and the paperwork behind them.","_yoast_wpseo_focuskw":"walker drive wheel alignment","_yoast_wpseo_canonical":"","_yoast_wpseo_meta-robots-noindex":"","_yoast_wpseo_meta-robots-nofollow":"","_yoast_wpseo_opengraph-title":"","_yoast_wpseo_opengraph-description":"","_yoast_wpseo_twitter-title":"","_yoast_wpseo_twitter-description":"","_aioseo_title":"","_aioseo_description":"","_aioseo_keywords":"","_aioseo_robots_default":"","_aioseo_robots_noindex":"","_aioseo_og_title":"","_aioseo_og_description":"","_aioseo_twitter_title":"","_aioseo_twitter_description":"","aiosp_title":"","aiosp_description":"","aiosp_keywords":"","_seopress_titles_title":"Walker Drive Wheel Alignment: Pre-Delivery Acceptance Checks","_seopress_titles_desc":"Before a training yard takes delivery of a horse walker, check walker drive wheel alignment, track joints, hub fixings and the paperwork behind them.","_seopress_analysis_target_kw":"walker drive wheel alignment","_seopress_robots_canonical":"","_seopress_robots_index":"","_seopress_robots_follow":"","_seopress_social_fb_title":"","_seopress_social_fb_desc":"","_seopress_social_twitter_title":"","_seopress_social_twitter_desc":"","_genesis_title":"","_genesis_description":"","_genesis_canonical":"","_genesis_noindex":"","_genesis_nofollow":"","slim_seo":"","footnotes":""},"categories":[233],"tags":[],"dipi_cpt_category":[],"class_list":["post-25991384","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-training-equipment"],"_links":{"self":[{"href":"https:\/\/dbhorsestable.com\/de\/wp-json\/wp\/v2\/posts\/25991384","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/dbhorsestable.com\/de\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/dbhorsestable.com\/de\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/dbhorsestable.com\/de\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/dbhorsestable.com\/de\/wp-json\/wp\/v2\/comments?post=25991384"}],"version-history":[{"count":0,"href":"https:\/\/dbhorsestable.com\/de\/wp-json\/wp\/v2\/posts\/25991384\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/dbhorsestable.com\/de\/wp-json\/wp\/v2\/media\/25981421"}],"wp:attachment":[{"href":"https:\/\/dbhorsestable.com\/de\/wp-json\/wp\/v2\/media?parent=25991384"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/dbhorsestable.com\/de\/wp-json\/wp\/v2\/categories?post=25991384"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/dbhorsestable.com\/de\/wp-json\/wp\/v2\/tags?post=25991384"},{"taxonomy":"dipi_cpt_category","embeddable":true,"href":"https:\/\/dbhorsestable.com\/de\/wp-json\/wp\/v2\/dipi_cpt_category?post=25991384"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}